Skip to content

How to Change the Time on Your CCTV Camera

This article is a collaborative effort, crafted and edited by a team of dedicated professionals.

Contributors: Muhammad Baballe Ahmad, Mehmet Cavas, Sudhir Chitnis, and Zhen-ya Liu.

✓ Verified & Tested Information

Wondering how to change the time on your CCTV camera? We’ve got you covered. Check out our blog post for a step-by-step guide.

Introduction

When you install a CCTV system, it’s important to sync its internal clock with your local time-not only to ensure that recordings reflect the correct hour and minute, but also so that you may accurately review the recorded footage. Doing so is easy, and takes only a few keystrokes. This guide offers detailed instructions on how to adjust the time on your CCTV camera so everything logs accurately.

Understanding the Basics

Changing the time on your CCTV camera is an important step as it will ensure that the footage you capture is time-stamped correctly. In this article, we will be discussing the basics of changing the time on your CCTV camera. We’ll go over the steps to take, the different settings you need to adjust, and tips on making this process easier.

Types of CCTV Cameras

Closed-circuit television (CCTV) cameras are a security measure used by businesses, homes and public authorities. In addition to being able to watch their surroundings in real time, CCTV cameras enable users to record footage that can be used for evidence or later review. CCTV cameras come in a variety of types and sizes, each offering different levels of security and features. Understanding the types available is important when it comes to selecting the right camera for the job.

The types of CCTV cameras can be categorized into:
– Analogue Cameras: These models are often considered outdated as part of a CCTV system, as they do not provide high-definition pictures. Analogue cameras transmit data using analogue signals and use coaxial cables instead of modern-day IP connections.
– Digital Video Recorder (DVR): This type converts analogue signals into digital ones before recording them onto storage devices such as hard drives or DVD’s. They usually include several video inputs with no monitor included; however, most models accommodate apps on mobile phones or tablets so you can view your footage remotely.
– Network Video Recorder (NVR): NVR’s are similar to DVR systems in that they both record digital signals however NVR’s have IP connections instead of analogue ones; these connections enable live viewing from remote devices. Additionally, since data is stored over a network you can access your footage anywhere there is an internet connection – allowing multiple users to view recordings simultaneously from anywhere in the world!
– IP Cameras: These cameras send digital signals that are composed solely of images without sound components like other systems. IP Cameras wirelessly transmit images on an internet connection, making them incredibly versatile when it comes to surveillance needs both indoors and outdoors.

Each type has its own unique features that may appeal to specific needs depending on the application intended for the camera system; understanding the basics will help ensure you get exactly what you need from your CCTV camera setup!

Setting Up the Camera

Setting up a CCTV camera is not a difficult task but it is important that you carry out the steps in the right order. Before you start your installation, it is essential to have all the necessary equipment. This includes the camera and power cable if it’s not already part of the package, any mounting and cabling parts required (if applicable) and instructions relating to your model of camera. Once you have everything, you should follow these steps:

1. Place and secure the mounting plate for your camera according to the instructions. If there are no specific instructions provided with your CCTV camera, install at a height of 2-3m from floor level for best results.
2. Connect any additional wiring such as an ethernet or PTZ control cables as needed for your particular model.
3. Plug in the power cable into a suitable power supply- this should be connected directly to an electrical outlet or use an extension lead with surge protection where possible if no outlet is accessible close to where you plan to mount the camera
4. Position the camera itself so that it faces in line with where you need monitoring and attach using screws per manufacturer’s instructions (where applicable). Check for clearances away from walls and other obstructions- this can help optimize viewing angles and reduce reflections from surfaces independently giving brighter viewing
5. Perform configuration on any settings relevant within your surveillance software- this is typically accessible once you connect via cables/ on LAN or using a monitor/ device configured by IP address
6 . Configure time zone settings – this controls which hours each day when recordings will be made as well as directly affecting how events are timestamped within footage recorded making sure all events can be correlated easily

Changing the Time

Changing the Features of CCTV such as the time is a simple procedure. By default, the camera will adjust for Daylight Savings Time (DST) automatically. However, if you need to adjust the DST setting or manually set the time, it is possible to do so. In this article, we will discuss how to change the Features of CCTV time on your CCTV camera.

Manually Changing the Time

One of the most important functions of your CCTV camera is setting the time accurately. Unexpected deviations in time, caused by incorrect or irregular settings, can result in a loss of video data or cause confusion if the footage needs to be examined. To ensure that your CCTV camera records times correctly, you must manually set the time.

You can verify that it is indeed possible to change the time on your CCTV camera by locating its user manual. There should be instructions on how to do it, as this varies between manufacturers and models – although they all have similar approaches. Once opened up and fully understood, follow these steps to manually set the correct time on a standard CCTV camera:

1. Locate live feed mode and turn it off if active – this will stop tge recording so that you may make any changes without interruption;
2. Access menu settings by pressing “MENU” button or some other button readily designated for altering system settings;
3. Scroll down until option for “Time Setup” is highlighted;
4. Enter current date & time manually and save afterwards;
5. Test proper synchronization between official clock & newly inputed parameters – if necessary repeat steps 1-4 above to adjust one or few digits within inputed numbers;
6. Return live feed mode after completion – all alterations should now remain permanent until next intervention from user side is required at which point steps listed above should be repeated again accordingly!

Changing the Time with a Software Program

For many users of closed-circuit television (CCTV) systems, there is an initial question they must answer before they can put the system to use. That is, how to change the time on the system? Fortunately, it’s easy to get this done with a software program.

Systems may vary in their exact procedure for changing the time so you should consult your user manual or contact your service provider. Generally speaking, though, here are the steps you should take when changing your CCTV camera’s time with a software program:
1. Open up the CCTV software associated with your camera. On some systems, it might only be available as part of an app for mobile devices or via a browser.
2. Once open, locate and select “Settings” from the onscreen menus or toolbars.
3. Select “Time & Date” from within that menu set and follow any additional instructions provided about setting date or time accordingly for your camera’s incoming video stream(s). If you have multiple streams from different cameras you may need to do this step several times until all devices have been assigned matching clock times/dates via these steps.. Usually you can select either military-style 24-hour notation (e.g., 11:00 PM = 23:00) or use AM/PM notation but be sure that all of your cameras are synced correctly BEFORE applying any changes made here!
4. If applicable, make further adjustments to ensure that daylight savings time changes are accounted for properly on all clocks by modifying relevant dropdowns menus under this same settings menu entry if needed – again depending upon specific model capabilities and needs/expectations (for example selecting one of four U.S.-based (or other country/regionally-based) versions of DST compliance options). Alternatively some models may detect this automatically without requiring adjustments from users if desired and appropriate.. Ensure any such changes are applied DEMONSTRATING CORRECTLY before proceeding further in general!
5. After ensuring correct date and time settings have been saved – reboot both Cameras’ recording devices AND viewing stations to ensure proper operation going forward by these newly applied settings & selections
6. Reopen the CCTV software suite associated with these cameras once more – accessed preferably starting at opening main viewing windows instead of each Camera’s individual home menus initially in order to be absolutely sure that all new recordings feature synchronized CES (Central Standard Time / eCTF) clock references across MultiCam feeds as well – again especially important if different ‘live’ feeds from multiple locations have been previously networked together now as this allows users peace-of-mind before developing reports which often rely heavily upon correct & reliable time codes included in each frame now created!

Troubleshooting

If you are having difficulties with changing the time on your CCTV camera, then this article will provide some useful troubleshooting tips. Many times, the issue can be easy to fix and does not require a full replacement of the camera. We will look at the basic steps to follow when trying to troubleshoot the issue. We will also discuss the common problems that you may face, as well as the solutions to try.

Common Problems with Changing the Time

It is important that the date and time settings on your CCTV camera are correct as they are displayed on recordings. Incorrect settings could cause confusion to whoever is reviewing the footage. However, there may be times when you need to change the time and date settings of your CCTV camera due to daylight savings or similar changes.

Here are common problems that you may encounter when trying to change the time:

-The time has been changed incorrectly: Double-check your manual for instructions on how to set the camera’s calendar and clock properly. If you find that you have made a mistake, return the settings back to their original value and try again.

-The display is not updating automatically: This can occur if your camera’s internal clock is spending too long trying to update or synchronize with its server clock. Try giving it some extra time before manually entering a new time or restarting the camera if this does not work.

-Unable to save changes: This usually occurs due to insufficient permissions or errors with user accounts. Make sure you are using the right password and account details when manually changing the date and time settings of your CCTV camera system so that your changes will be saved correctly once they have been entered in successfully.

How to Reset the Camera

Troubleshooting your CCTV camera and resetting it can often solve many of the issues that you might be having. Resetting the camera will help restore it to its original state, and should resolve any problems caused by corrupted settings.

To reset the camera:
1. Locate the Reset button which is usually located on the back or bottom of the camera
2. Press and hold this button for five seconds until you hear a beep sound
3. The time needs to be manually reset once you have pressed the Reset button

To set the time on your camera:
1. Access your device via a web browser – enter its IP address into a URL bar in your browser (usually 192.168..) and wait until you’ve logged in to the device web console
2. Navigate to “Set Time” in either Maintenance or Configuration section, depending on how it’s labeled
3. Set up local time or synch with an NTP server to ensure accuracy
4. Save any changes you have made by clicking “OK” or “Apply” button
5. You may need to reboot your device for any changes take effect

Your CCTV camera is now properly configured and ready for use!

Conclusion

In conclusion, changing the time on your CCTV camera is an important task that will ensure that your recordings are accurately timestamped when you review them. To perform this task, you will need to use the device’s onboard setup menu. The exact procedure for entering this menu may vary depending on the type of CCTV camera. However, most units offer straightforward instructions for making adjustments to the settings, such as modifying the time or changing other system settings. It’s important to double-check that all settings have been correctly changed and saved in order to ensure that all of your recordings are fully functional and accurate.

How to Change the Time on Your CCTV CameraCheckout this video:

Share this Article