Skip to content

How to Connect Your Qube CCTV to WiFi

This article is a collaborative effort, crafted and edited by a team of dedicated professionals.

Contributors: Muhammad Baballe Ahmad, Mehmet Cavas, Sudhir Chitnis, and Zhen-ya Liu.

✓ Verified & Tested Information

If you’re looking to connect your Qube CCTV system to your WiFi network, you’ve come to the right place. In this blog post, we’ll show you how to do just that, step-by-step.

Gather the Necessary Materials

To get the most out of your Qube CCTV, it is important that you connect it to your home WiFi network. Before you get started, make sure you have all the necessary materials. This includes the Qube CCTV, the power adapter, an Ethernet cable, and a compatible wireless router. Now that you have gathered all the necessary materials, you are ready to move on to the next step.

Qube CCTV

If you’re connecting your Qube CCTV to your WiFi network, you will need to gather the necessary materials beforehand. You should have both the Qube CCTVSetup Wizard installation disc and the accompanying Quick Setup Guide (QSG). Additionally, it is important that you know the login credentials for your wireless router.

You will also need an FTP (File Transfer Protocol) program such as FileZilla installed on your computer or mobile device. This software enables a secure connection between two computers and facilitates file transfers between them. Additionally, depending on how complex you network setup is, you may need additional hardware such as a switch or access point to connect the Qube CCTV to your WiFi system.

Finally, make sure that all of the necessary cables are available ahead of time; otherwise, connecting can be more difficult than anticipated. It is recommended that if connected directly to Router/ AP (Access Point), then use conventional Ethernet cable (RJ45), not a crossover cable since most Routers and Access Points have an auto-correction feature which eliminates any sorting problem in cabling.

Router

Before attempting to set up your Qube CCTV camera to your router, it is important to gather the necessary materials. The first item that you will need is a router. Make sure you select a router that has access to 2.4GHz wifi and not just 5GHz. This can usually be found in the description for the router or on the manufacturer’s website. It is also important to select a router that is compatible with your Qube CCTV camera model – please consult the manufacturer’s website or any provided documentation on compatibility specifications. Once you have selected and purchased your router, you will need to locate and assemble all other necessary materials such as Ethernet cables, power supplies and other components needed for installation of the router and security camera systems in accordance with provided instructions

Ethernet cable

Before connecting your Qube CCTV to your WiFi network, the first step is to gather the necessary materials. The most important item you will need for this task is an Ethernet cable. An Ethernet cable is required for connecting your device to a router or modem (or other networking device) using a wired connection-which is likely the case if you are configuring or installing IoT devices or wired network components.

When selecting an Ethernet cable for this purpose, it’s important that you use Category 5e (CAT5e) cables or higher, such as CAT6 or CAT7. This will ensure that you have enough bandwidth to adequately transfer the data needed without compromising the quality of your connection. In some cases, such as for long-distance systems, fiber optic cables may be more suitable.

Connect to the Router

To connect your Qube CCTV to the WiFi, you will need to connect it to the router. This process is relatively simple, and should only take a few minutes. First, you will need to make sure that your router is connected to the internet, and you should also check that your WiFi signal is strong. Then, follow these steps to connect your Qube CCTV to the router.

Plug the Ethernet cable into the Qube and Router

To connect the Qube CCTV to your router, plug one end of an Ethernet cable into the back of the Qube, and the other end into an available output port on your router. Once the cable is in place, you need to configure both the Qube and your internet router for a successful connection.

Before proceeding with configuration, remember to check that you have access to your router by navigating to its192.168.1.1 IP address in a web browser (Two or three sets of numbers separated by periods or dot ranges such as 192.168.). You may need to log in with username/password credentials and any required security questions; consult your router product’s documentation for specific instructions.

Once you have successfully logged in, scroll down to locate the Wireless Settings section and make sure that there are no other devices connected with the same name as your Qube (or any device run by a different name). If two devices have similar names then it will cause interference when trying to connect them both together wirelessly.

From there, navigate back over to your Qube CCTV’s interface page by inputting it’s IP address: 10.11.12 (Square bracketed numbers separated by periods) on a web browser, click on ‘Settings’ followed by ‘Advanced Settings’ and select ‘Wireless Setup’ from the drop-down menu that appears at the top of the page under System Settings tab located in Advanced Set Up window . Enter details including wireless network name (SSID), passkey, encryption type etc., confirm it before Save and wait for few seconds for wireless connection process completed! Now all you need to do is enter valid test credentials on camera view interface page accessible through PC or smartphone/tablet devices from anywhere around world!

Connect the Qube to the Router’s power source

Before connecting your Qube to the router, make sure to turn on the power switch of the router. Now connect one end of the power cord to the power port of your router and plug in the other end into a wall socket or power strip. When you hear a beeping sound from your router, it indicates that it has been turned on successfully and is ready for use.

Once you have successfully powered up your router, you will need to physically connect it with your Qube for it to access WiFi network. The first step in this process is making sure there are no obstructions between the two devices and that they are within practical range for wireless transmission. Once this is done, carefully connect an Ethernet cable from one of the LAN ports on your router to a designated port labelled “Ethernet” or “Network” on your Qube camera surveillance unit. Plug in both ends securely until they click into place and ensure there are no loose connections as this could cause unreliable transfer of data.

Configure the Qube

Configuring the Qube is the first step to connecting your CCTV to WiFi. You will need to establish a connection between the camera and your home router. This involves setting up the camera’s connection settings, such as the IP address and port number. Once the settings have been configured, you will be able to connect the camera to the network. Let’s look at the steps involved in configuring the Qube.

Open the Qube’s web interface

Configuring your Qube CCTV to WiFi is easy and can be done in a few simple steps. First, you’ll need to open the Qube’s web interface by connecting your PC or laptop to it via an Ethernet cable and typing the Qube’s IP address into your browser. You’ll find the IP address printed on a label on the back of the device, or you can use a network scanner app to find out which IPs are connected to your network.

Once you’re connected, you’ll be presented with a login prompt. You can enter admin for both the username and password. This will take you to the main configuration page where you can customize settings related to advanced features such as remote access and motion detection levels.

From here, click on the Network tab at the top of the screen and then select Wi-Fi from the list of options on that page. After that, choose whether you want it to connect automatically or manually (manual is usually more secure). If you chose manual connection, enter your WiFi network name along with any other information required – such as its password – and click Connect. Wait a few minutes for it to connect before continuing with any other configuration tasks.

Connect to WiFi

Connecting your Qube CCTV to your WiFi can be a simple and straightforward process. With the right setup and some basic knowledge of WiFi networks and routers, you can easily get your Qube CCTV up and running with your home or office WiFi network. In this article, we’ll go over the steps you need to take to properly connect your Qube CCTV to your WiFi network.

Enter your WiFi network’s name and password

Once you have located and identified your Qube CCTV’s network name, you will need to enter your own WiFi network name and password. To do this, open your device’s menu and select the ‘Connect to WiFi’ option from the menu. Then, enter your WiFi network’s name and password. You should ensure the security type matches that in use for your home or business’ wireless router, otherwise the connection may fail. When you have entered the network name and password, hit ‘Apply’ to save it. Your Qube CCTV should now be connected to your home or business’ wireless router. You may also wish to connect other devices such as phones, laptops or tablets at this stage if desired.

Save the settings

Once you have completed the setup process and verified that the Qube Device is successfully connected to your WiFi network, you will need to save the settings. To do this, press and hold the “OK” button until a confirmation message appears on screen.

In order for your Qube device to remain connected to your home WiFi network, you may need to change a few settings. To access these settings, use Internet Explorer or Firefox on your laptop or computer to access the web-based configuration page of your router by typing in 192.168.1.1 in the address bar of your preferred browser window. Enter the login information (e.g., username/password) provided by your service provider into the prompt window and press “Sign In”.

Select “Advanced Settings” at the top of the page and locate “DHCP Client List” from within this menu option list. Here you will find all devices connected to your router including Qube Camera under its respective IP address (e.g., 192..814). Select this IP address and click “Edit” located at bottom left hand side of page in order proceed further with editing/saving steps associated with FTP uploads etc..

You will be directed to a new page containing all information related regarding device connection associated with that IP address such as wireless profile name, wireless encryption mode etc.. Modify or leave them as it is and click on Apply button below highlighted by Green Color located at bottom left hand side of page in order save changes made by you accordingly Once finished navigate back main router login page and disconnect from overall network connection in order completely finish up WiFi setup process for connecting Qube Security System Product with home established WiFi Network as desired

Test the Connection

Before you can connect your Qube CCTV to WiFi, you need to test the connection. This is important because it ensures that the camera is able to communicate with the router. Testing the connection is the first step to connecting your Qube CCTV to your WiFi network. The rest of this article will explain the steps you need to take to successfully test the connection.

Check the Qube’s web interface

Once you have successfully connected your Qube to the same network as your laptop or smartphone, the next step is to access the Qube’s web interface. Accessing the web interface allows you to configure and manage your Qube directly from a web browser.

To gain access, first use a computer or device on the same network as your Qube and open a web browser. Then in the address bar, type in http://yourQubeName (or CUBE01 if using default). This should open up the login page which will require you to enter a username and password which can be found by looking in your account settings when logged into https://www.cctvqb.com/

Once you are logged in, click on “WiFi setup” on the left hand side of the screen and enter your Wi-Fi password into the box. Save these changes and select “reboot” from the options on the bottom of the page. This will restart your Qube and should start connecting it to WiFi after about 30 seconds or so – depending on Wi-Fi setup times and congestion levels in this area of Your Home/Office Network. Once connected, you can test whether or not it’s working by either accessing another webpage or logging onto another app/website which requires an internet connection for example YouTube or other streaming services like Netflix etc.

Verify the connection using a mobile device

Before using a Qube device to monitor your home or business, you’ll want to make sure the connection is working properly. Easily verify the connection using any mobile device, such as a cell phone or tablet.

First, open your mobile device’s Wi-Fi settings and connect to the Qube’s wireless network. Next, go to your web browser and enter 192.168.1.254 into the address bar. On this page you should see a list of all devices connected to the network, including your phone or tablet along with any other connected devices such as a computer or laptop.

Once you’ve established that connection is successfully established by verifying it on your phone or tablet, you can begin monitoring with the Qube. Make sure that your Qube is kept in an area of the house or business where its signal can reach far enough for you to get reliable video feed and have reliable connections at all times. With a good view of what’s happening in and around your home or property at all times, feel secure knowing that nothing goes unnoticed!

How to Connect Your Qube CCTV to WiFiCheckout this video:

Share this Article