Skip to content

How to Remove a Nissan Qashqai Door Lock

This article is a collaborative effort, crafted and edited by a team of dedicated professionals.

Contributors: Muhammad Baballe Ahmad, Mehmet Cavas, Sudhir Chitnis, and Zhen-ya Liu.

✓ Verified & Tested Information

This guide provides step-by-step instructions on how to remove a Nissan Qashqai door lock.

Introduction

Removing a Nissan Qashqai door lock can be a tricky task. This article provides step-by-step instructions on how to remove the lock safely and securely. Before starting, it’s important to ensure that the vehicle is not in drive or in park, that all occupants are outside of the car, and that all surrounding items have been moved away from the vehicle. Additionally, make sure you have access to a few common tools such as pliers, screwdrivers, hex keys, and lubricants. Once you are ready to begin removal, follow these steps carefully in order to protect yourself and your vehicle.

Preparation

Removing a Nissan Qashqai door lock can be a tricky job. Before attempting this repair, it is important to make sure you have all of the necessary tools and parts. It is also important to be familiar with the car’s parts and layout. You should research the procedure beforehand and be sure to have the manual available for reference. Once you have everything you need, you can start preparing to remove the door lock.

Gather the necessary tools

Before you begin the process of removing the Nissan Qashqai door lock, make sure that you have all of the proper tools necessary for the job. You will need a Phillips head screwdriver, a flathead screwdriver and perhaps some needle nose pliers. Additionally, if your model has been fitted with a manual door locking knob or handle, you may find it helpful to use an adjustable wrench. Make sure all of these items are ready and easily accessible before you start working on your Nissan Qashqai’s locking mechanism.

Prepare the area

Before attempting to remove the door lock from a Nissan Qashqai, it is important to prepare the area. This task requires a great deal of patience and should not be rushed. First, you must determine which side of the car you need to access. Unscrew or unbolt any components that may prevent you from reaching the lock and lay them out in an organized manner so that they can be easily reattached afterwards. Then, use masking tape or other materials to cover any nearby painted or delicate surfaces that may be damaged during the procedure. Securely position a solid object on either side of the car’s exterior so that it does not move during the repair process. Ensure all necessary tools and supplies have been gathered in order for this job to move along without interruption. Once everything is prepared, you can begin to remove the Nissan Qashqai door lock.

Removing the Door Lock

If you need to replace or repair the door lock on your Nissan Qashqai, it will be necessary to remove it first. This can be a simple process if you have the right tools and know the correct steps to take. It’s important to be careful when handling and working on the door lock to avoid accidental damage. In this article, we’ll provide detailed instructions on how to safely remove a Nissan Qashqai door lock.

Remove the door panel

The first step to removing a Nissan Qashqai door lock is to remove the interior door panel. Before beginning, make sure that the door is closed and make sure all power sources to the vehicle are turned off. Carefully pry off the plastic caps located on either side of the door handle. Use a flathead screwdriver or a trim tool and insert it into one of the slots. Gently pull back until you have loosened it enough for removal. With both caps removed, locate and remove any screws that attach additional clips or components to the panel so that they can be disassembled from the door panel.

In order to access its screws, you may need to remove several other items from around the area, such as an armrest, console trim panel, window control switch assembly, speaker covers, emergency release cable holder and perhaps even a grab handle depending on your Nissan Qashqai model. Once all components have been removed from around this area of the door frame- such as phone charging equipment and coat hook anchors- disconnect any remaining electrical connections before beginning to unclip each section of paneling using a flathead screwdriver or trim tool in order to carefully begin prising away each component carefully without causing damage by brute force or over-examination of each component Finally, slide off any mounting rails affixed to the inner door so that it can be completely detached from its clips and cabling before eventually lifting away from its housing near where you began your unscrewing process. Your Nissan Qashqai’s lock is now accessible for removal (or repair) in its entirety!

Locate the door lock

In order to remove the door lock from a Nissan Qashqai vehicle, you must first locate the door lock. The Nissan Qashqai has a centralized locking system that can be found on the inside of the driver’s side. You will need to remove the plastic cover to access the lock.

Once you have located the lock, you will need to find the two screws that are securing it in place. These usually appear as black screws on top of green caps. Using a screwdriver, carefully unscrew these two screws and set them aside in a safe place.

The door lock should now be ready to be removed from its bracket in your Nissan Qashqai vehicle. To ensure proper removal, use caution when lifting it up and away from its secure position. Keep in mind that some additional wiring may need to be disconnected before removing it completely from the bracket and door panel itself.

Disconnect the wiring

Before removing the Nissan Qashqai door lock, you must first disconnect the wiring. Start by lowering the interior door panel, located on the entry side of the vehicle. To do this, unscrew any visible screws holding the panel in place. Then use a flat screwdriver to leverage any clips holding the panel. If necessary, lift slightly to remove any grooves or slots that may be securing it in place.

Once you have lowered and removed the interior door panel from its mounting, locate and unplug all of the wiring harnesses connected to it while using caution not to damage them. The wires are located near where your arm would normally be when moving around inside the vehicle. Once unplugged, you can move onto disconnecting and removing the door lock itself.

Remove the door lock

Removing the door lock from a Nissan Qashqai may require a few tools and some extra time. In some cases, it will be a simple task but for others, it may require some professional help. Below are the instructions for how to remove the door lock from your Nissan Qashqai.

Tools Needed:
-Flat head screwdriver
-Phillips head screwdriver
-A pair of needle nose pliers

Steps:
1. Begin by locating the square hole in the bottom of the door near the inside handle assembly.
2. Insert the flathead screwdriver into this hole and press down firmly in order to release a pin that attaches the inside door handle to the lower assembly.
3. Carefully remove any screws that are holding together parts of the interior handle, such as two Phillips head screws in both vertical sides of the door panel and two more located at each side of where it joins to form a rectangle frame with two flat surfaces on top and bottom.
4. Unscrew all bolts or screws along top edge around latch before pulling trim panel away from baseplate on interior side of internal lock cylinder, making sure to avoid damaging locking mechanism parts or cables behind panel during removal process.
5. Remove center trim plate by releasing clips at top edge and pull away from baseplate; these are typically released with needle nose pliers so ensure that you’re using force in small increments rather than an excessive amount all at once which can lead to breakage or mechanical damage if used incorrectly during this step.
6. Finally, use pliers again to loosen lock cylinder nut before unscrewing it completely with fingers until unlocking mechanism is detached from outside handle assembly; ensure that all wires or springs are properly bundled together afterward during reassembly process so as not to damage any internal components while attaching them back onto door frame once lock has been removed successfully!

Reinstalling the Door Lock

After you have removed the old door lock from your Nissan Qashqai, it is now time to reinstall the new door lock. This can be a tricky process, but by following the right steps you can make sure that the door lock works properly. In this section, we will discuss how to reinstall the door lock and make sure it works correctly.

Reinstall the door lock

Once the damaged door lock has been removed from your Nissan Qashqai, it’s time to begin reinstalling it. Installing a new door lock is a straightforward process and can be completed in just a few minutes.

Begin by sliding the new door lock into place and making sure that the pin protrudes out of the top of the slot. Then, insert the triangular clip into position between the base of the door lock and its housing. This clip will hold your door lock securely in place once it has been tightened down.

Next, put an M6 rubber ring washer on one of two M6 bolts that are supplied with most new locks today. This washer should fit securely around the screwhead before you thread it onto an anchor point on either side of your car’s interior paneling. Tighten both bolts firmly using an appropriately sized socket wrench or screwdriver.

Finally, connect up any wires for power locks or other accessories back to their original positions, then replace any screws and trims that have been removed from your vehicle’s interior paneling during this process. Make sure all fixing screws are tight to help keep your Nissan Qashqai safe, secure and weatherproofed for years to come!

Reconnect the wiring

Once the door lock is completely disconnected from the Nissan Qashqai, it’s time to reconnect the wiring. The door lock motor has at least one lead that must be plugged into the wiring harness. In addition, a pair of wires that sends power to the switch must also be connected. To locate the wiring plug, locate an access panel on top of the door’s interior trim. Open this panel and find where each wire runs through its individual slot in the rubber grommet seal. When all plugs are connected, tuck any excess wires back into their slack.

Reinstall the door panel

Reinstalling the door panel is the final step in reinstalling a Nissan Qashqai door lock. Begin by carefully sliding the door panel back over the lock assembly. Make sure it is fully seated in its tracks, and that all clips are properly engaged. Use a screwdriver to secure all fasteners around the panel, replacing damaged ones if necessary.

Position the pre-cut foam inserts over each of the exposed lock components, and fasten them with tape or glue to ensure they stay in place until you are ready to reassemble your Nissan Qashqai door lock system. Reattach any trim pieces that were removed prior to disassembly, like window switches or adjustable armrests.

Check that none of your wires have been accidentally disconnected as you worked on reinstalling your Nissan Qashqai door lock- these have specific plugs that will fit only one way and should not be forced into place. When all steps are complete, test your work by inserting and turning the key in your newly installed door lock system.

Conclusion

With proper care and procedures, you can successfully remove the door lock on your Nissan Qashqai without damaging any of the components or risking damage to yourself. It’s important to remember to keep an eye on the little details throughout the process and not to rush and take shortcuts. Once all of the components have been removed, you can safely lift the door lock from its housing, disconnecting it from the car wiring in your Nissan Qashqai and allowing you to free up space for other car parts. In conclusion, it’s relatively straightforward to remove a Nissan Qashqai door lock with a few easy steps.

How to Remove a Nissan Qashqai Door LockCheckout this video:

Share this Article